Hertz HCP 4D
D-CLASS FOUR CHANNEL AMPLIFIER
Hertz HCP 4D is a D Class car audio amplifier, able to offer up to 1160W (RMS); it is the ideal choice for those who want high power levels in complex systems. Extremely versatile, complete in its functions, provided with Speaker-In and RCA-In inputs to work with any head units, it has been designed to work also in mono (selectable mode), for a three-channel system with sub and front, or a powerful two-channel system.
All the Hertz Compact Power amplifiers are assembled with high-quality components and feature a complete and by-passable crossover system. The dissipation system is optimized with the heat being transferred to the heat sink and then dissipated through the sides of the amplifier.
Power Upgrade with Hertz HCP 4D
Hertz’ HCP 4D four-channel amplifier will deliver 70 watts RMS to each of your vehicle’s front and rear speakers, improving the sound of your audio system as well as your listening experience. This versatile amp can also be used to run a pair of speakers with the front channels while sending 260 watts RMS to a subwoofer from the bridged rear channels. A variable bass boost on the rear channels helps your sub sound its best.
Bi-amp a 2-way active system
The high- and low-pass filters of the HCP 4D can be set as high as 3200 Hz, so you could use the amp to power a couple of tweeters with the front channels, and a couple of woofers with the rear channels, and gain more control over your system’s different tones and levels.
Works in almost any system
This amp will work with an aftermarket receiver using RCA connections, or a factory radio using speaker-level wiring and Hertz’ ART™ automatic remote turn-on system. If your receiver only has a single L/R output, you can engage the Mono buttons on the front and rear input channels so the amp can power your four speakers from those two inputs.
When you think of Italian cars, you think of style, performance, and awesome sound. The same goes for Italian audio gear. Hertz speakers, subs, and amps have made cars sound super since 1998. Known for great sound and technological innovation, high-end gear from Hertz will bring powerful performance audio to any vehicle or vessel.
Hertz HCP 4D Product Highlights:
- 4-channel car amplifier
- 70 watts RMS x 4 at 4 ohms (130 watts RMS x 4 at 2 ohms)
- 260 watts RMS x 2 bridged at 4 ohms (4-ohm stable in bridged mode)
- CEA-2006 compliant
- Class-D amplifier technology
- frequency response: 10-60,000 Hz
- variable high- and low-pass filters (50-3200 Hz, 12 dB/octave) on front and rear channels
- variable bass boost (0-12 dB at 50 Hz) on rear channels
- mono buttons allow 4 outputs from 2 inputs
- preamp and speaker-level inputs
- Automatic Remote Turn-on with speaker-level inputs
- preamp outputs
- fuse rating: 20A x 2
- wiring and hardware not included with amplifier
- 8-gauge power and ground wire recommended
- 8-7/8″W x 2″H x 7-1/2″D
- warranty: 1 year
- Our 60-day money-back guarantee
- MFR # HCP 4D
What’s in the Hertz HCP 4D box:
Hertz HCP 4D owner’s manual
- 4-Channel amplifier
- Four 20A ATO fuses (2 installed)
- Two 7″ Speaker level input harnesses
- 4mm Allen wrench
- 2mm Allen wrench
- Four M4 x 20mm mounting screws
- 4 Flat washers
- Quick Start Guide
- Warranty Card
|Channel mode||4 – 3 – 2|
|Output Power (RMS)
@ 14.4 VDC
|4 Ch: 85 W x 4 (4 Ω)
4 Ch: 145 W x 4 (2 Ω)
3 Ch: 85 W x 2 (4 Ω) + 290 W x 1 (4 Ω)
3 Ch: 145 W x 2 (2 Ω) + 290 W x 1 (4 Ω)
2 Ch: 290 W x 2 (4 Ω)
A/B: 50 ÷ 3.2k Hz @ 12 dB/Oct.
A/B: 50 ÷ 3.2k Hz @ 12 dB/Oct.
|Distortion – THD
(100Hz @ 4Ω)
(A weighted @ 1V)
(100Hz @ 4Ω)
|Size W x D x H
|215 x 190 x 50 (8.46 x 7.48 x 1.97)|
REFINED HEATSINK WITH HIGH CONVECTION CAPABILITY
The extruded aluminum heatsink provides high efficiency thermal performance; using the top side of the heatsink to effectively dissipate the heat generated by the electronic components. The internal temperature remains constant at all power levels.
COMPLETED FILTER SECTION
A large array of filters customized for each model, to achieve maximum versatility: Lo-Pass, Hi-Pass, Band-Pass, Full Range, Subsonic, Bass Boost, Phase, and Mono. Filtered pre-amplified outputs along with multiple adjustments are featured on the HCP 1D, offering the user endless connection possibilities with any source.
Special balanced input circuitry rejects electro-magnetic disturbances present on the Pre-amplified or Speaker level inputs. The power supply stage features a multiple winding transformer and Low-ESR 105°C capacitors, selected to ensure high efficiency and current capability.
Automatic Remote Turn-On/Off function automatically turns the amplifier on and off with the OEM radio; eliminates the need for a remote signal from the source when using the Speaker-In. This function can also be disabled.