Kenwood Excelon XR1001-1
Reference Kenwood Excelon XR1001-1 Series mono subwoofer amplifier — 1,000 watts RMS x 1 at 2 ohms
Kenwood Excelon XR1001-1 HIGH-PERFORMANCE PARTS
Special capacitors and inductors have been carefully selected for the Kenwood Excelon XR1001-1’s LC filter. Specifically essential for achieving high-resolution audio. These high-performance parts reduce noise and distortion and ensure excellent sound quality.
Kenwood Excelon XR1001-1 DEEP BASS SOUND
- By using a down-firing subwoofer and superior technologies, the audio system generates surprisingly high-quality sound and powerful bass. Altogether being compact.
Kenwood Excelon XR1001-1 DEEP BASS SOUND ENHANCED SIGNAL TO NOISE RATIO
- The feedback value of the current Kenwood Excelon XR1001-1 Amplifier has been optimized to improve the S/N ratio. As a result, the noise level has been significantly reduced by up to 40%.
SPECIALIZED CIRCUIT DESIGN
- The Kenwood Excelon XR1001-1 noise reduction system specifically employs a special layout. Separating the analog circuit, digital amplifier circuit, and power supply circuit. This keeps interference between the circuits to a minimum, decreasing noise.
WIRED REMOTE CONTROL
- The wired remote control surprisingly allows you to adjust the volume of a subwoofer when connected to the head unit.
|Title||Class D Mono Power Amplifier|
|Amplifier Type||Class D|
|CTA-2006 Primary Ratings||Power Output||500Watts RMS x 1 at 4 Ohms and ≤1%THD+N|
|Signal-to-Noise Ratio||85dBA (Reference: 1Watt into 4Ohms)|
|Maximum Power Output||MAX POWER||2000W|
|Power Output||Rated Power at 14.4V||500Watts RMS x [ch] (4 Ohms, 20-200Hz, ≤1.00% THD)|
1000Watts RMS x [ch] (2 Ohms, 100Hz, ≤1.00% THD)
|Specifications||Signal to Noise Ratio||100dB (Reference: Rated Power into 4Ohms at 14.4V)|
|Frequency Response||20Hz-200Hz (+0dB, -3dB)|
|Input Impedance||10k ohm|
|Speaker Impedance||Bridged connection 4Ω (2Ω to 8Ω allowable)|
|Audio Section||Low-Pass Filter||Built-in Variable Low-Pass Filter (50Hz-200Hz, -12/-24dB/oct)|
|Infrasonic Filter||Built-in Variable Infrasonic Filter (15Hz-40Hz, -24dB/oct)|
|Bass Boost||Built-in Bass Boost Control (40Hz, 0dB-+18dB)|
|RCA Input Sensitivity||0.2[V] – 5.0[V]|
|Speaker Level Input Sensitivity||4.0[V] – 12.0[V]|
|Terminals||Battery & Ground||XR Series Type Terminal (capable for 4 gauge)(Ni)|
|P.CON||XR Series Type Terminal (capable of 8 gauge)|
|Speaker Output||XR Series Type Terminal (capable of 8 gauge)|
|Line In||RCA (Gold Colored)|
|Line Out||RCA (Gold Colored)|
|Speaker Input||RCA IN A Channel|
|General||Dimensions(WxHxD)||320 [mm] x 51 [mm] x 169 [mm]|
12-5/8 inch x 2 inch x 6-5/8 inch
|Operating Voltage||14.4V（11-16V allowable）|
|Current Consumption||60 [A]|
|Key Features||CTA-2006 Compliant|
2 Ohms Load Capability
Speaker Level Input
Signal Sensing Turn-on
Power MOS-FET Switching Power Supply
Extruded Aluminum Heat Sink Design
Line Output Terminals for Extension
Super-slim profile, big-time power
Would you want to join the club? Kenwood’s XR1001-1 mono amplifier Excelon Reference Series can fuel up to 1,000 watts of your subwoofer. (That isn’t an exaggerated real-world ranking you see on any amplifiers). Advanced circuit design and upgraded components virtually eliminate noise. Even better, because of its extremely low footprint, the XR1001-1 can fit in several different locations in your car—this is just two” high.
Designed for optimum efficiency
This amp was filled with space-saving features by Kenwood. The Class D technology decreases the power supply size, while the internal heatsink is tilted to lower its height without affecting the refrigerant. Recessed power terminals with wire speaker support reduce the amp’s footprint further, cover the connections and provide a neat and professional appearance for the installation.
Controls for the best bass
This no-nonsense amplifier has low pass and subsonic filters that pick the right frequencies for your sub so it’s going to play efficiently. An adjustable bass boost is also available to give a low-end punch if you like. You can adjust the bass volume from the front seat using a wired distance.
For the digital amplifier LC filter, which is important for the production of the high audio resolution, the Kenwood eXcelon XR1001-1 Special condensers and inductors have been carefully chosen. These high-performance components minimize noise and distortion and maintain a high quality of the signal.
DEEP BASS SOUND
The Kenwood eXcelon XR1001-1 audio system produces high-quality sonic and strong bass despite remaining lightweight, using a down-fired subwoofer and superior technology.
ENHANCED SIGNAL TO NOISE RATIO
Kenwood eXcelon XR1001-1 XR amp tailored the input value to enhance the S/N ratio. As a result, the level of noise was decreased by up to 40%.
SPECIALIZED CIRCUIT DESIGN
A special design is used to distinguish the analog circuit from the optical amplifier, and electrical circuits of the Kenwood eXcelon XR1001-1 noise reduction system. This minimizes the interference between the loops, reduces the noise, and thereby achieves high efficiency and clarity of sound.
WIRED REMOTE CONTROL
With the Kenwood eXcelon XR1001-wired 1’s remote control, you can change the subwoofer volume when paired with the head unit.