Hertz MPK 165.3 PRO
Component Speaker System
About the Hertz MPK 165.3 PRO
Improve your sound by a 1,000%
Any things are worth indulging in, and one of them is the pleasure of your everyday commute. Installing the Mille Series MPK 165.3 PRO 6-1/2″ component speaker system in your vehicle will provide you with the best of what Hertz has to offer: an enthusiastic approach to quality sound.
Each speaker uses a “Boundary Free” rubber surround with its improved pressed pulp and cotton fiber woofer to transfer more air with precision for more impactful lows. The woofer’s V-cone configuration increases dispersion and produces audible lows. Superior damping is also important to the sound of these speakers; reduced resonance decreases distortion for a more realistic sound.
Included crossovers lead to the woofer’s impressive low-frequency reaction and a seamless transition to the Tetolon dome tweeter’s stunning function. Hertz has tweeter-level access, allowing you to tailor the peaks to your system.
The Hertz Philosophy
Hertz suggests that a strong speaker can show the emotional strength of the music you enjoy. That’s a high bar to clear, but with their dedication to using quality materials and breaking the boundaries of architecture, they’re more than up to the task. Hertz’s team of music enthusiasts is dedicated to upgrading the car’s sound system for maximum listening pleasure.
- the component system includes 2 woofers, 2 tweeters, and 2 external crossovers
- 6-1/2″ pressed pulp woofer with Boundary Free rubber surround
- Tetolon dome tweeter
- handles up to 110 watts RMS (220 watts peak power)
- frequency range: 40-22,500 Hz
- sensitivity: 92 dB
- woofer top-mount depth: 2-1/2″
- grilles included
- warranty: 2 years
- MFR # MPK 165.3
What’s in the box:
- Two MP 165.3 Woofers
- Two MP 25.3 Dome tweeters (with attached 10″ length of speaker wire)
- Two MPCX 2.3 Crossover networks
- Tweeter flush mount trim rings x2
- Tweeter flush mount clamps x2
- Angled surface mount housings x2
- OEM tweeter mounting brackets x2
- Tweeter grilles (installed) x2
- Woofer grilles x2
- Grille putty
- Sixteen 3/4″ Screws (large head)
- Four 3/4″ Screws (small head)
- Four 1/2″ Flat head screws
- 8 Large speed clips
- 4 Small speed clips
- Owner’s manual (English/ Spanish/ French/ German/ Italian/ Portuguese/ 21 Others)
- Templates on box
Features & specs
|Speaker Size||6 1/2|
|Tweeter Design||29mm Dome|
|Woofer Composition||Pressed Pulp/Cotton Fiber|
|Parts Warranty||2 Years|
|Labor Warranty||2 Years|
|Sensitivity (1W at 1 meter)||92|
|Sensitivity at 2.83 volts||N/A|
|Frequency Response||40 – 22.5k Hz|
|Minimum RMS Wattage||—|
|Maximum RMS Wattage||110|
|Peak Power Handling (Watts)||220|
|Top-mount Depth (Inches)||2 1/2|
|Bottom-mount Depth (Inches)||2 11/16|
|Cutout Diameter or Length (inches)||5 1/2|
|Mounting Height (Inches)||0.42|
This Product Features
Boundary Free Surround: higher cone surface area technology- allowing the ability to move more air. Thermal and mechanical linearity is assured due to the surrounds fabricated with butyl rubber.
Klippel Verified: The Klippel distortion analyzer, a device that uses a laser and computer software to do a large-scale analysis of drivers in motion. The KDA helps Hertz optimize the speaker’s motor composition, voice coil alignment, and suspension to yield the stablest possible execution.
Tweeter Mounting: The ML 28.3 tweeters are designed to flush mount using the included clamps. They can also be mounted to many factory tweeter brackets using the M3 threaded insert on the back of the tweeter housing. The tweeters are permanently mounted in their housings.
Woofer Grille: The three-piece grille can be used in several different ways. All three pieces (black plastic frame, gray plastic inner grill, and black steel mesh) can be mounted together. The frame and mesh can be mounted without the inner grille, the frame and inner grille can be mounted without the mesh, and the inner grille can be mounted alone.
Tweeter Mounting Dimensions:
|Flush Mount||60° Angled Surface Mount||30° Angled Surface Mount||Top Mount (behind factory grille)||Bottom Mount (behind factory grille)|
|Cutout Diameter||1.605″||N/A||N/A||1.306″ (minimum)||1.798″ (minimum)|
Crossovers: Each crossover has a tweeter output level switch; choose between flat and +2dB. The crossover point is 3.5 kHz, the low pass slope is 6 dB/octave, and the high pass slope is 12 dB/octave. They have screw terminal inputs and outputs that will accept bare wire or spade connectors up to 0.315″ wide.
- Width: 4.02″
- Height: 1.47″
- Depth: 3.02″
Upgrade your sound ten fold
If your daily drive isn’t enjoyable you need to install the Mille Series MPK 165.3 PRO 6-1/2″ component speaker system in your vehicle so that you can encounter the very best of Hertz excellence.
State of the art engineering
Each individual speaker is equipped with a “Boundary Free” rubber surrounding for a more powerful low end. In addition, the enhanced pressed pulp and cotton fiber woofer are able to move more air with precision.
The subwoofer’s V-cone shape improves diffusion and aids in providing low ends you can physically feel as well as minimizing resonance while reducing distortion providing better dampening.
Incorporated crossovers provide the effective low-end frequency experience of the subwoofer and a smooth shift to the beautiful work of the Tetolon dome tweeter. Adjust the highs to match your application with Hertz tweeter-level controls.
The Hertz View
In fact, to understand the love of sound is to understand Hertz’s philosophies. Hertz understands that a great speaker should draw out the emotional energy of the music you cherish, as a result- partnered with their commitment to using deluxe components and boundary-pushing engineering; they produce premium quality. Besides, music requires no compromise. Incorporated music lovers, Hertz is obliged to optimizing your vehicle sound system for complete audio delight.
|Power Handling – Peak W||220|
|Power Handling – Continuous W||110|
|Frequency response Hz||40 ÷ 22,5k|
|Sensitivity dB SPL||92|
|Voice coil Ø mm (in.)||25 (1)|
|Woofer size mm (in.)||165 (6.5)|
|Tweeter size mm (in.)||29 (1.14)|
|Woofer magnet||High-density flux ferrite|
|Woofer Cone||Pressed-pulp cone with cotton fibers|
|Crossover type||2 Way Passive Crossover|
|Crossover cut off||3,5 kHz|