10″ – 1500w Max Power, Dual 4W Voice Coil, Armid Fiber IMPP cone, Rubber Surround – Subwoofer
About the Pioneer TS-D10D4
TS-D10D4 and Pioneer created their D-Series subs with that thought in mind. They built the TS-D10D4 10″ subwoofer to handle up to 500 watts RMS, while it dishes out impressive low-frequency punch. This sub features an injection-molded polypropylene cone that’s impregnated with Aramid fibers for exceptional precision and strength. A butyl rubber surround supports the woofer during cone excursion so you’ll get accurate, hard-hitting bass notes even when the music’s turned up loud. The sub’s dual 4-ohm voice coils give you more wiring options when setting up your system.
D Subwoofer, FORCEFUL, DEEP, DEFINED.
Too much isn’t enough, embrace the bass. The D subwoofer is a culmination of Pioneer technologies that produce thick, deep, powerful, and accurate bass that makes listening to your favorite music energetic, fun, and engaging.
Combining bass quality and bass quantity with high power, plus installation flexibility that provides high performance in both acoustic suspension (sealed) and bass reflex (ported) enclosures, the D subwoofer is the ultimate all-around performer. Slam, attack, power. Don’t just listen to your music, feel it.
TS-D10D4 with BUTYL RUBBER SURROUND
Made of a specially blended, highly durable, and moisture-resistant compound, butyl rubber keeps the cone moving in a linear direction, seals the cone to the basket, and quickly dampens cone vibration once the signal has changed or stopped. This results in less distortion and superior frequency response.
ARAMID FIBER INTERLACED INJECTION MOLDED POLYPROPYLENE (IMPP)
Polypropylene (PP) is a tough thermoplastic resin that is an ideal material for a subwoofer cone – with low mass and high damping, PP cones offer good sensitivity and low distortion. However, polypropylene cones lack the rigidity and strength required for high output and extremely low bass. To resolve this, Pioneer engineers used advanced Computer-Aided Manufacturing to develop a process to blend aramid fibers into the polypropylene resin during the injection molding process. The resulting Aramid Fiber Interlaced IMPP subwoofer cone is incredibly strong and low mass with high rigidity and superior strength to produce deep, powerful, and undistorted bass.
LARGE DIAMETER TS-D10D4 VOICE COIL AND DOUBLE STACKED MAGNETS
A subwoofer motor structure consists of the voice coil and magnet assembly. Increasing the diameter and length of the voice coil provides greater control of the woofer cone and higher power handling. To take full advantage, however, the magnet must also be increased, both in magnetic power and physical size. The D subwoofer uses an oversized 4-layer voice coil and high energy double stacked magnets to increase the overall power handling and SPL output with no sacrifice in sound quality.
|Maximum Peak Power Handling||1500W|
|Continuous Power Handling (RMS)||500W|
|Frequency Response||20 Hz to 6600 Hz|
|Sensitivity(1W/1 m)||76 dB|
|Impedance||4 Ω x 2|
|Cut-Out Dimensions||9″ (230 mm)|
|Recommended Enclosure (Sealed)||0.50to 0.80 cu. ft.|
|Vd [ft3]||1.30 E-02|
|Sd [m2]||3.43 E-02|
|Revc||Dual 3.6 Ω|
|Levc (at 2,000 Hz)||4. 31 mH (8 Ω)
1.08 mH (2 Ω)
|Zmax||62.48 (8 Ω)
14.32 (2 Ω)
|Bl||16.1 Tm (8 Ω)
8. 0 Tm (2 Ω)
|Cms||1.4 x 10-4 m/N|
|Mg. Wt.||1,600 g|
|Flux Density||6,530 Gauss|
|VC. Diameter||40 mm|
|Sp. Displacement [Liter]||0.96|
|Sp. Displacement [ft3]||0.034|
|Recom. Enclosure [Liter]||19,81|
|Recom. Enclosure [ft3]||0.7|
|F0 (in Cabinet)||57.7|
|Q0 (in Cabinet)||1.06|
Recommended Enclosure Volumes and Port Sizes
|(Sealed) Enclosure Volume (cu. ft.) Center||0.7|
|(Sealed) Enclosure Volume (cu. ft.) Min.||0.5|
|(Sealed) Enclosure Volume (cu. ft.) Max.||0.8|
|(Vented) Enclosure Volume (cu. ft.) Center||0.7|
|(Vented) Enclosure Volume (cu. ft.) Min.||0.6|
|(Vented) Enclosure Volume (cu. ft.) Max.||0.8|
|(Vented) Ported Diameter x Length (inch) Center||2″ Dia. x 5″|
|(Vented) Ported Diameter x Length (inch) Min.||2″Dia. x 4″|
|(Vented) Ported Diameter x Length (inch) Max.||2″ Dia. x 6″|