Description
Kenwood KFC-P710PS
Performance Series Kenwood KFC-P710PS 6-1/2″ component speaker system
About the Kenwood KFC-P710PS
The performers
After years of patchy factory sound, I remember installing aftermarket speakers and simply being grateful for audio that was consistent and solid. Kenwood’s Performance Series delivers all of that and goes a step beyond, providing articulate lows, clean vocals, and startling highs. With their latest technology incorporated into these speakers, you’ll get the biggest sonic bang for your buck.
Quality Kenwood sound
Kenwood’s KFC-P710PS 6-1/2″ component system provides a rich, dynamic sound reinforced by a solid low end. This polypropylene woofer cone sports a Diamond Array pattern that increases surface strength for reduced distortion and improved bass response. A rubber surround provides reliable playback in spite of the prolonged exposure to the elements that live in your car doors brings.
A 1″ soft dome tweeter rounds out this strong system, providing high-frequency details with accuracy. And Kenwood makes things a little easier by incorporating an in-line crossover network into each tweeter — no need to find a spot for a bulky crossover module.
Installation note: You’ll need a pair of universal backstraps to install the tweeters in the factory locations.
Woofer | Size | oversized160mm | 6-1/2in |
---|---|---|---|
Diaphragm | Injection P.P. cone | ||
Surround | Rubber | ||
Basket | Steel: Black | ||
Magnet | Ferrite | φ90*t15 | |
Tweeter | Size | 25mm | 1in. |
Diaphragm | Soft Dome | ||
Magnet | Neodymium | φ23.5*t3.4 | |
DIMENSION | |||
Woofer (Unit) | Width (w_Gr) | 180.0mm | 7-1/16in |
Width (w/o_Gr) | 158.0mm | 6-1/4in | |
Height (w_Gr) | 180.0mm | 7-1/16in | |
Height (w/o_Gr) | 158.0mm | 6-1/4in | |
Cutout Diameter | 126.0mm | 4-15/16in | |
Tweeter Height | – | – | |
Depth (w_Gr) | 84.2mm | 3-5/16in | |
Depth (w/o_Gr) | 68.8mm | 2-11/16in | |
Mounting Depth | 56.0mm | 2-3/16in | |
Tweeter | Width | 37.5mm | 1-1/2in |
Height | 37.5mm | 1-1/2in | |
Depth | 19.1mm | 3/4in | |
WEIGHT | Woofer with Grille (pc.) | 990g | 2.2lbs |
Woofer without Grille (pc.) | 900g | 2.0lbs | |
Gross Weight | 2,800g | 6.2lbs | |
Weight of Magnet (Woofer) | 330g | 11.7oz | |
NOMINAL IMPEDANCE | 4 | Ohms | |
POWER HANDLING | Peak Power | 280 | W |
RMS Power (CEA SPEC) | 80 | W | |
SENSITIVITY | 86 | DB / W at 1m | |
FREQUENCY RESPONSE | 63Hz- | 24,000Hz | |
CROSSOVER FREQUENCY | 4,900Hz | ||
ACCESSORY | Grille | *2 | |
Grille Holder | *2 | ||
In-Line Network | *2 | ||
Tw Bracket | |||
Free Mount | *2 | ||
Flush Mount | *2 | ||
GM Bracket | *2 | ||
Screw Set | |||
φ4*25 | *8 | ||
φ4*6 | *8 | ||
φ3*16 | *4 | ||
Speed Nut | |||
φ4 | *8 | ||
φ3 | *4 | ||
Wing Nut M5 | *2 | ||
Butyl Rubber | *1 | ||
SPECIAL FEATURE | Diamond Array Pattern Diaphragm |
Reviews
There are no reviews yet.